The heater alone may not be enough. Hyundai’s owner’s manual says that when you point the airflow at the windshield to clear moisture, the air conditioner and fresh-air intake mode run together, and that if the air feels cold you can use the temperature control to get warm air. Warming the cabin and reducing moisture are two separate jobs. Button names and automatic functions differ by model, so also check the “window moisture/frost removal” section of your own manual.
Is the fog inside or outside the glass?
What you do first depends on which side the moisture is on. The same manual says that driving for a long time in defrost mode with the A/C on, on a very humid day, can leave moisture on the outer surface of the windshield because of the temperature difference with the outside, and it advises clearing it quickly with the wipers. If the inside is cloudy, follow the steps below. If the outside is cloudy, start with the wipers.
Why turn on the A/C and fresh-air mode
The manual describes cars with the window-moisture function: when you select the windshield airflow position, the A/C and fresh-air intake mode start automatically, and a low fan speed is set to around the middle step. You can cancel this by pressing the A/C button or the recirculation/fresh-air button, after which the settings return to their previous state. In winter, use the temperature knob or switch to get warm air. If your car has no such function, you have to press the same combination yourself.
Three easily missed checks
First, the outside air intake. The manual says removing snow, ice or wet debris such as leaves from the intake can reduce moisture on the glass. If you parked where leaves piled up in autumn, it is worth a look. Second, washer fluid. Summer fluid can freeze on the glass in winter, so the manual says to top up with winter fluid. Third, when you must melt frost quickly, the manual describes holding the engine at about 2,000 RPM to warm the heater coolant fast, then pressing the defrost button with temperature and fan at maximum. That is that manual’s instruction, so check that your own manual says the same and do it only while parked in a safe place.
If you would rather not do it yourself
GANZIKA is an on-site service that comes to where your car is. If rainy or snowy visibility bothers you, see oil-film removal and water-repellent coating, which removes the oil film on the windshield and finishes with a water-repellent coating. Interior cleaning is possible even on rainy days. We cannot claim that a water-repellent coating prevents fog itself, and effects and durability vary with the product and conditions. A flat space for one car is enough, and an underground car park works too. Call 010-7997-1933 (daily 09:00-20:00) for scheduling and quotes, and see the service area. Aftercare is covered in the care guide after polishing and coating.
FAQ
Is recirculation or fresh-air mode better?
The manual describes fresh-air intake mode running together when clearing moisture. Automatic functions differ by car, so check the moisture-removal section of your own manual first.
Why is my view still poor with the wipers on?
Wipers work when moisture is on the outer surface, but they will not clear cloudiness on the inside. Identify which side first.
Can I use summer washer fluid in winter?
Not recommended. Hyundai’s manual says summer fluid can make the glass freeze in winter, so top up with winter fluid.
Source
- Hyundai Owner’s Manual, window moisture/frost removal (DN8) (Korean, checked 2026-11-06)